Product Description
SSP Putty & Putty Pads
SpecSeal® SSP Firestop Putty excels at sealing cabling penetrations and outlet boxes. SSP Putty is non-hardening and easily hand works around grouped cabling penetrations forming a re-enterable seal allowing for future work. When applied with outlet boxes, SSP Putty easily works into voids and seams forming a continuous seal against fire and the products of combustion.
- Available in tubes or preformed pads
- Remains pliable and workable for the lifetime of the installation
- Acoustically tested
- Will not harden overtime!
Applications
Metal Pipe
Cables
Electrical Box
Properties
STC Rating
Intumescent
Smoke Barrier
Low VOC
Re-Enterable
No Expiration
Specifications
| Putty Pads Physical Properties | |
|---|---|
| Color: | Red |
| Odor: | None |
| Density: | 1.45 kg/L (12.08 lb/gal) |
| Solids: | 100% |
| In-Service Temperature: | -10°F to 120°F (-23°C to 49˚C) |
| Installation Temperature: | Less than 100°F (38°C) |
| Storage Temperature: | Less than 100°F (38°C) |
| STC Rating: | 62 (Relates to specific construction) (ASTM E 90-04/ASTM C919) |
| VOC Content**: | 0.00 lbs/gal (0.0g/L) |
| Shelf Life: | No Limit |
| **ASTM D 3960 and EPA Federal Reference Method 24. | |
| Putty Physical Properties | |
|---|---|
| Color: | Red |
| Odor: | None |
| Density: | 1.45 kg/L (12.08 lb/gal) |
| Solids: | 100% |
| Expansion Begins: | 230°F (110˚C) |
| Volume Expansion: | > 500% (free expansion) |
| In-Service Temperature: | -10°F to 120°F (-23°C to 49˚C) |
| Storage Temperature: | Less than 100°F (38°C) |
| STC Rating: | 62 (Relates to specific construction) (ASTM E 90-04/ASTM C919) |
| VOC Content**: | 0.00 lbs/gal (0.0g/L) |
| Shelf Life: | No Limit |
| **ASTM D 3960 and EPA Federal Reference Method 24. | |
Ordering Information
| Item # | Case Qty. (min) | Qty. | UPC # 730573 | Description | Weight |
|---|---|---|---|---|---|
| SSP100 | 6 | 1 | 02100 | 36 in3 (0.6 liter) bar | 2.3 lbs (1.04 kg) |
| SSP28 | 1 | 1 | 02101 | 24 in3 (0.4 liter) bar | 1.85 lbs (0.84 kg) |
| SSP4S | 20 | 1 | 02200 | 7.25” x 7.25” x 3/16” (18.4 x 18.4 x .5 cm) pad | 0.59 lbs (.27 kg) |
| SSP9S | 20 | 1 | 02300 | 9.00” x 9.00” x 3/16” (22.9 x 22.9 x .5 cm) pad | 0.99 lbs (.44 kg) |
Related Products
Related Products
SSB Intumescent Firestop Pillows
SSB Intumescent Firestop Pillows
SpecSeal® SSB Firestop Pillows easily compress and conform around any penetrant. Equally suited for new or existing conditions, SpecSeal® Pillows make short work of even the most complex through-penetration firestop conditions.
Applications
Metal Pipe
Plastic Pipe
Multi. Pen.
Cable Tray
Cables
Blank Opening
Busway
Duct
SSS Intumescent Firestop Sealant
SSS Intumescent Firestop Sealant
SpecSeal® SSS Firestop Sealant is a premium grade water-based Intumescent firestop sealant. SpecSeal® SSS Sealant incorporates our proprietary two-stage intumescent technology making it the go to choice for any combustible or non-combustible penetrants. As little as a 1/2″ applied depth of SSS Sealant is required to provide up to a 4 Hr Fire resistance rating when tested to ASTM E814/UL 1479.
Applications
Metal Pipe
Plastic Pipe
Multi. Pen.
Cable Tray
Cables
Duct
Busway
Blank Opening
Head of Wall
Ready® Sleeve
Ready® Sleeve
SpecSeal® Ready® Sleeve are designed for new cabling penetrations where sleeves are required. Each Ready® Sleeve kit includes a preformed steel sleeve with rolled edges, steel escutcheon plates with intumescent gaskets, and a dosage of our SpecSeal® SSP Firestop Putty. The rolled edges of each Ready® Sleeve eliminate the need for bushings while the included escutcheon plates and gaskets take the place of steel strut and strap supports.
Closet Flange Firestop Gasket
Closet Flange Firestop Gasket
A one-piece, molded rubber, intumescent pad that installs beneath a 3″ or 4″ (76 mm or 102 mm) closet flange to effectively firestop the opening. No caulk to clean. Installs from the top, saving labor.
