Ordering & Installation
EZ-Firestop Grommets
Cable Grommets for single cable penetrations
The Kick-In Floor Kit installs a Series 33 pathway into a 4 in. (102 mm) core drilled round opening. Built-in, self-locking fasteners securely wedge the pathway into the concrete. Installation is simple! Insert plate into opening. Insert pathway into plate and tighten set screws. Plate is locked in place! No fasteners and no sealant required.
RFG1
RFG2
Ordering Details
EZ-Path Series 22 Fire-rated Pathway
Single Pathway
EZ Path® Series 22 Fire-Rated Pathway is a maintenance-free pathway solution for smaller cable bundles through fire-rated wall assemblies. The device is offered as a complete kit without the need for additional accessory products for installation.
EZD22
Ordering Details
EZ-Path Series 33 Fire-rated Pathway
The maintenance-free fire-rated pathway solution for moderate cable volumes through fire-rated walls and floors. Intumescent pads expand to form a insulative char that prevents the passage of smoke and flame.
Single Pathway
The Single Pathway can be used in combination with any Series 33 Mounting Plate or Series 33 Accessory
EZD33FWS
Ordering Details
Circular Wall Plate
The Circular Wall Plate Kit allows a single Series 33 Pathway to be installed in a 4 in. (102 mm) round opening or 3 in. (76 mm) x 3 in. (76 mm) square opening.
EZDP133CWK
EZP133CW
Ordering Details
Square Wall Plate
The Square Wall Plate is engineered to facilitate the installation of the EZ-Path® Series 33+ pathway in fire-rated walls. The pathway is designed to be installed in a 3 in. (76 mm) x 3 in. (76 mm) square opening.
EZDP33FWS
EZP133W
Ordering Details
EZ-Path Series 33 Floor and Retrofit Plates
Series 33 pathways can be installed in floors as well as around existing cables
New Cable Installations Through Floors
The Kick-In Floor Kit installs a Series 33 pathway into a 4 in. (102 mm) core drilled round opening. Built-in, self-locking fasteners securely wedge the pathway into the concrete. Installation is simple! Insert plate into opening. Insert pathway into plate and tighten set screws. Plate is locked in place! No fasteners and no sealant required.
EZDP133FK
EZP133K
Ordering Details
Existing Cable Installations in Sleeves or Conduit
The Conduit Attachment Kit installs a Series 33 Pathway within a 4 in. (102 mm) sleeve or conduit. The split plate design allows for installation in both new and existing cabling applications.
EZDP133CAK
EZP133CA
Ordering Details
Existing Cables in Oversized Wall Openings
The Retrofit/Repair Wall Kit is a multi-purpose split mounting plate designed to facilitate EZ-Path® device installations around previously installed cables or in new or existing cabling applications where a large opening or opposing offset openings have been created in either gypsum board or masonry block walls. The assembled two-piece plates measuring 8 in. x 10 in. (203 mm x 254 mm) can be rotated in independently of each other in 90° increments to cover irregular or offset openings.
EZDP33WR
EZP133R
Ordering Details
EZ-Path Series 33 Gang Plates
Series 33 pathways can be ganged for additional capacity and cable organization
Two Gang
Designed to allow two Series 33 pathways to be installed in a 3 in. (76 mm) x 6 in. (152 mm) opening.
EZDP233GK
EZP233W
Ordering Details
Three Gang
Designed to allow three Series 33 pathways to be installed in a 3 in. (76 mm) x 9 in. (229 mm) opening.
EZDP333GK
EZP333W
Ordering Details
Four Gang
Designed to allow three Series 33 pathways to be installed in a 3 in. (76 mm) x 9 in. (229 mm) opening.
EZDP433GK
EZP433W
Ordering Details
Seven Gang
Designed to allow seven Series 33 pathways to be installed in a 3 in. (76 mm) x 21 in. (533 mm) opening. Attachment plates can be fastened to studs spaced 24 in. (610 mm) O.C. as the wall is being built.
EZDP733GK
EZP733W
Ordering Details
EZ-Path Series 33 Accessories
Series 33 accessories that partner with the base Series 33 device and mounting plates
Extension Module
Extension modules attach to the end(s) of the Series 33 pathway and increase the effective length for thicker barriers. Each extension module increases the effective length by 6 in. (152 mm). Extensions work with all other accessories. Sold as individual devices.
EZD33E
Ordering Details
Radius Control Module
Radius Control Modules (RCMs) snap into the ends of pathways and provide a 1 in. (25 mm) minimum bend radius for cables. RCMs support cable bundles at 100% rated loading. Insertion slots are provided for support ties (not included). Sold in pairs.
EZD33E
Ordering Details
EZ-Path Series 44+ Fire-rated Pathway
Single Pathway
The Single Pathway can be used in combination with any Series 44+ Mounting Plate or Series 44+ Accessory
EZD44S2
Ordering Details
Single Pathway Through Walls
The Single Wall Plate Kit is designed to allow a single Series 44+ pathway to be installed in a 6 in. (152 mm) round opening or 4-1/8 in. (105 mm) x 4-5/8 in. (118 mm) opening.
EZDP44S2
EZP144W
Ordering Details
Single Pathway Through Walls with Existing Cables
The Split Wall Plate is engineered to facilitate the installation of the EZ-Path® Series 44+ pathway in fire-rated walls. The pathway is designed to be installed in up to a 6 in. (152 mm) diameter round opening.
EZDP44RS2
EZP144RS
Ordering Details
EZ-Path Series 44+ Multi-Gang Wall Plates
Series 44+ pathways can be ganged for additional capacity and cable organization
Ganged Wall Installation for 1-5 Devices
Multi-Gang Wall Brackets are designed to allow 1 to 5 Series 44+ pathways to be installed in finished walls or as the wall is being built. Plates attach directly to studs, and pathways are installed prior to application of gypsum board. Brackets are suitable for attachment to studs spaced up to 24 in. (610mm).
EZP544W
Ordering Details
Ganged Wall Installation for 2-10 Devices
Designed to allow 10 Series 44+ pathways to be installed in finished walls or as the wall is being built. Plates attach directly to studs, and pathways are installed prior to application of gypsum board. Brackets are suitable for attachment to studs spaced up to 24 in. (610 mm).
EZP544WD
Ordering Details
Ganged Wall Installation for 6 Devices
Designed to allow 6 Series 44+ pathways to be installed in finished walls or as the wall is being built. Plates attach directly to studs, and pathways are installed prior to application of gypsum board. Brackets are suitable for attachment to studs spaced up to 24 in. (610 mm)
EZP644W
Ordering Details
Ganged Wall Installation for 12 Devices
Designed to allow 12 Series 44+ pathways to be installed in finished walls or as the wall is being built. Plates attach directly to studs, and pathways are installed prior to application of gypsum board. Brackets are suitable for attachment to studs spaced up to 24 in. (610 mm).
EZP644WD
Ordering Details
Ganged Wall Installation for 5 Devices Vertically
Designed to allow 1 to 5 Series 44+ pathways to be installed vertically in finished walls or as the wall is being built. Pathways Not Included.
EZP544WV (Devices not Included)
Ordering Details
EZ-Path Series 44+ Modular Floor Grid
Modular Floor Grid Systems utilize the high volume, EZ-Path® Series 44+ pathways installed in banks of four to provide your cabling systems with room to grow.
Single-Slot Modular Floor Grid
Available complete with Pathway Module (4 pathways) or with firestop filler panels covering the slots.
EZDG444S2
EZG444
Ordering Details
Two-Slot Modular Floor Grid
Available complete with Pathway Module (8 pathways) or with firestop filler panels covering the slots.
EZDG844S2
EZG844
Ordering Details
Four-Slot Modular Floor Grid
Available complete with Pathway Modules (16 pathways) or with firestop filler panels covering the slots.
EZDG1644S2
EZG1644
Ordering Details
EZ-Path Series 44+ Fire-rated Pathway Floor Kit
Single Pathway Installation Through Floors
The Split Floor Plate Kit is designed to allow a single Series 44+ pathway to be installed in a 6 in. (152 mm) round opening. The split plate is designed to permit use with previously installed cables.
EZDP144FKS2
EZP144F
Ordering Details
EZ-Path Series 44+ Accessories
Series 44+ accessories that partner with the base Series 33 device and mounting plates
Extension Module
Extension modules attach to the end(s) of the Series 44+ pathway and increase the effective length of the pathway for thicker barriers. Each extension module increases the effective length by 6 in. (152 mm). Extensions work with all other accessories.
EZD44ES
Ordering Details
Radius Control Module
Radius Control Modules (RCMs) snap into the ends of pathways and provide a 1 in. (25 mm) minimum bend radius for cables. RCMs support cable bundles at 100% rated loading. Insertion slots are provided for support ties (not included). Sold in pairs.
EZRCM44S
Ordering Details
Modular Grid Splice Plate
Join multiple single-bank grids (EZDG444S) together for use in elongated floor slot penetrations using the Floor Splice Plate
EZG444CP (Devices and Frames not Included)
Ordering Details
Modular Grid Hanger Brackets
EZG444CP
Ordering Details
Pathway Modular Gang for Modular Grid
EZD444MBS2
Ordering Details
T-Rating Kit for Single-slot Modular Grid
TRK444
Ordering Details
EZ-Path Cable Tray Retrofit Device
The solution for remediation of non-compliant cable trays in fire-rated construction. Restoring non-compliant cable pathway penetrations to compliance without the need to remove cables or previously installed firestop products.
EZ-Path Cable Tray Retrofit Device
The EZ-Path® Cable Tray Retrofit Device quickly and easily remediates existing 12"-18" wide wire basket cable trays of up to 100% visual fill restoring fire performance without the need for additional firestop products. Its two-part design installs around non-compliant cable tray penetrations, restoring fire and smoke leakage performance.
EZCTR612
Ordering Details
EZ-Path Cable Tray Retrofit Device Adapter Plates
EZ-Path Cable Tray Retrofit Device Adapter Plates for oversized opening conditions (for 12"-18" wide EZCTR Devices)
EZCTR600P
Ordering Details
EZ-Path Cable Tray Retrofit Device for Wide Trays
The EZ-Path® Cable Tray Retrofit Device quickly and easily remediates existing 20"-24" wide wire basket cable trays of up to 100% visual fill restoring fire performance without the need for additional firestop products. Its two-part design installs around non-compliant cable tray penetrations, restoring fire and smoke leakage performance.
EZCTR624
Ordering Details
EZ-Path Retrofit Device
The solution for remediation of non-compliant conduit stubs and cable sleeves in fire-rated construction. Restoring non-compliant cable pathway penetrations to compliance without the need to remove cables or previously installed firestop products.
EZ-Path Retrofit Device
The EZ-Path® Retrofit Device quickly and easily retrofits sleeves of up to 100% visual fill restoring fire performance without the need for additional firestop products. Its two-part clam shell design installs around projecting sleeves and cable bundles restoring fire and smoke leakage performance.
EZDR200
EZDR400
Ordering Details
EZ-Path Retrofit Device Adapter Plates
Adapter plates for mounting EZ-Path Retrofit Devices on smaller diameter cable stubs and sleeves
EZPR150
EZPR300
Ordering Details
EZ-Path Series 33NEZ Smoke & Acoustical Pathway
Designed for easy installation in non-fire-rated floor, ceilings, and walls providing exceptional cable capacity with tested and approved cable capacities ranging from 0 up to 100% visual fi
Single Device Pathway for Walls
Series 33NEZ Pathway for non-fire-rated Walls
NEZ33
NEZ33-W
Ordering Details
Series 33NEZ Ceiling Kit
Series 33NEZ Pathway for non-fire-rated drop ceilings
NEZ33CK2
Ordering Details
Single Device Pathway for existing cables in non-fire-rated Walls
Series 33NEZ Pathway pre-disassembled for installation around existing cables in non-fire-rated walls
NEZ33R
Ordering Details
Two & Four Gang Pathway Kits
Two & Four Gang Pathway Kits for non-fire-rated Walls
NEZDP233
NEZDP433
Ordering Details
Two & Four Gang Plates
Two & Four Gang Plates for non-fire-rated Walls (Devices not included)
NEZP233
NEZP433
Ordering Details
EZ-Path Series 44NEZ Smoke & Acoustical Pathway
Designed for easy installation in non-fire-rated floor, ceilings, and walls providing exceptional cable capacity with tested and approved cable capacities ranging from 0 up to 100% visual fill. Cable capacity equivalent to EZ Path® Series 44+ Fire Rated Pathway
Single Device Pathway for Walls
Series 44NEZ Pathway for non-fire-rated Walls
NEZ44
NEZ44-W
Ordering Details
Three-Gang Pathway for Walls
Series 44NEZ Pathway Three-Gang for non-fire-rated Walls
NEZD344
NEZD344-W
Ordering Details
Five-Gang Pathway for Walls
Series 44NEZ Pathway Five-Gang for non-fire-rated Walls
NEZD544
NEZD544-W
Ordering Details
Single & Three-Gang Ceiling Kit
Series 44NEZ Pathway for non-fire-rated drop ceilings
NEZ44CK
NEZ344CK