Don't know which product to use? Use our firestop system search to find the right product for your application.
Showing all 17 results
The EZ-Path® Series 44+ Fire-Rated Pathway is designed for high cable volume conditions through fire-rated walls and floors while eliminating the burden of ongoing maintenance. The Series 44+ incorporates self-sealing intumescent pads that automatically adjust to the installed cable fill without the need for user manipulation. Under fire exposure, the intumescent pads expand and swell resisting the passage of smoke and flame.
The EZ-Path® Series 33 Fire-Rated Pathway is a maintenance-free pathway solution for moderate cable volumes through fire-rated walls and floors. The Series 33 incorporates built-in intumescent pads that automatically adjust to cable fills. When exposed to flame and high temperatures, the intumescent pads expand to form a dense insulative char that prevent the passage of smoke and flame.
Overfilled cable sleeves are the bane of every facilities team, bring these deficient openings back into code compliance with the EZ-Path® Retrofit Device. Its two-part clam shell design installs around projecting sleeves and cable bundles restoring fire and smoke leakage performance. The EZ-Path® Retrofit Device quickly and easily retrofits sleeves of up to 100% visual fill restoring fire performance without the need for additional firestop products.
EZ-Firestop® Grommets make sealing penetrations of individual and small bundles of cables through gypsum board walls a snap. Molded from premium plenum-plastics and incorporating a soft foam inner core, EZ-Firestop® Grommets eliminate the need for sleeves, firestop putties & sealants.
SpecSeal® SSS Firestop Sealant is a premium grade water-based Intumescent firestop sealant. SpecSeal® SSS Sealant incorporates our proprietary two-stage intumescent technology making it the go to choice for any combustible or non-combustible penetrants. As little as a 1/2″ applied depth of SSS Sealant is required to provide up to a 4 Hr Fire resistance rating when tested to ASTM E814/UL 1479.
SpecSeal® LCI Firestop Sealant is a water-based intumescent sealant intended for a wide range of through-penetration and construction joint applications. SpecSeal® LCI Sealant has excellent caulking properties making it easy to apply in vertical applications as well as overhead.
SpecSeal® Composite Sheet is the ideal solution for large openings where a permanent seal is required. Composite sheet consists of a thin sheet steel with intumescent embedded onto a single side. Composite sheet partners with other SpecSeal® firestop products such as Firestop Collars and EZ-Path® Devices to size down oversized openings.
SpecSeal® SSM Firestop Mortar is a light-weight cost conscious solution for oversized openings in concrete walls and floors. Once mixed with water, SpecSeal® Mortar forms a light weight, low density slurry that easily applies into concrete walls and floors. SpecSeal® Mortar cures quickly and will not spall or crack due to freezing or changes in temperature.
SpecSeal® EP Powershield™ Electrical Box Inserts install within steel electrical boxes directly against the back of the box. Powershield™ Box inserts are equally suited for remediation as well as preinstallation before the boxes have made it to the job site. Powershield™ Box inserts incorporate pre-scored openings allowing for easy installation around ground lugs.
SpecSeal® SSP Firestop Putty excels at sealing cabling penetrations and outlet boxes. SSP Putty is non-hardening and easily hand works around grouped cabling penetrations forming a re-enterable seal allowing for future work. When applied with outlet boxes, SSP Putty easily works into voids and seams forming a continuous seal against fire and the products of combustion.
SpecSeal® FP Intumescent Firestop Plugs are easy to install, creating a robust seal against fire and smoke. Firestop Plugs make an excellent solution for temporary installation overnight as well as permanent long-term seals for blank openings and cable penetrations. Sized to fit 2″ and 4″ diam. openings, firestop plugs make sealing conduit stubs and sleeves a breeze.
SpecSeal® Ready® Sleeve are designed for new cabling penetrations where sleeves are required. Each Ready® Sleeve kit includes a preformed steel sleeve with rolled edges, steel escutcheon plates with intumescent gaskets, and a dosage of our SpecSeal® SSP Firestop Putty. The rolled edges of each Ready® Sleeve eliminate the need for bushings while the included escutcheon plates and gaskets take the place of steel strut and strap supports.
SpecSeal® Ready® Split Sleeve kits easily install around existing cables. Each Ready® Split Sleeve kit includes two preformed steel sleeve halves with rolled edges, steel escutcheon plates with intumescent gaskets, and a dosage of our SpecSeal® SSP Firestop Putty. Ready® Split Sleeve’s two-piece body and plates easily capture previously installed cables while tightly fastening to the penetrated barrier.
Designed for easy installation in non-rated floor, ceilings, and walls, EZ-Path® Series 33NEZ Smoke & Acoustical Pathway provides exceptional cable capacity with tested and approved cable capacities ranging from 0 up to 100% visual fill. A single unit installed in a wall exceeds the cable carrying capacity of a 4” (102 mm) sleeve utilizing typical putty firestop systems (35% cable loading).
Designed for easy installation in non-rated floors and walls, EZ-Path® Series 44NEZ Smoke & Acoustical Pathway provides exceptional leakage and acoustical performance with tested and approved cable capacities ranging from 0 up to 100% visual fill. A single unit has equivalent cable capacity to the Series 44+ Fire-Rated Pathway providing consistency of performance across the low-voltage pathway regardless of barrier type.
The perfect brochure to use as a reference tool for any STI Product on the market.
Our complete product brochure designed for international markets.
Our complete EZ-Path® product line in one convenient location.
Our complete brochure for the EZ-Path® Retrofit Device.
EZ-Path® saves time, money, and resources by removing ongoing downstream costs.
STI is dedicated to providing our clients and partners with the industry’s most advanced cost-effective solutions for perimeter fire barrier systems.
STI’s Wood Frame fire & smoke products
+ User Guide: US & Canada
+ User Guide: Europe & Middle East
+ Electrical & DataCom User Guide
+ EZ-Path® Fire Rated Pathway
STI warrants that its products will be free of defects for one year from the date of purchase. In the event a product does not conform to this warranty, the sole and exclusive remedy is, at STI’s option, replacement of the product or refund of the purchase price. The warranty provided herein shall be void and of no effect in the event that the product is not installed in accordance with STI’s published instructions, listed systems and applicable building and safety codes. THIS WARRANTY IS IN LIEU OF ALL OTHER REPRESENTATIONS AND EXPRESSED OR IMPLIED WARRANTIES (including the implied warranties of merchantability or fitness for a particular use) AND UNDER NO CIRCUMSTANCES SHALL STI BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING, WITHOUT LIMITATION, ANY LOSS OF REVENUE, PROFIT OR USE. Prior to use, the user shall determine the suitability of the product for its intended use, and the user assumes all risks and liability for subsequent use. No person other than an officer of STI is authorized to bind STI to any other warranty for any product for which this warranty is issued.
Did you know that many specifications for firestopping reference older fire test standards or obsolete products?
Let our firestop experts assist by reviewing your firestop specifications and making appropriate recommendations. STI provides this service free of charge.