Installation Options For Series 33 Pathway Previously Installed Cables Through Walls And Floors Previously Installed Cables Through Walls Oversized Openings Through Walls

Retrofit/Repair Wall Kit is a multi-purpose split mounting plate designed to facilitate EZ-Path installations around previously installed cables or in new or existing cabling applications where a large opening or opposing offset openings have been create d in either gypsum board or masonry block walls. The assembled two-piece plates measuring 8" x 10 "(200 x 250mm) can be rotated independently of each other in 90° increments to cover irregular or offset openings. Plates are designed to overlap the wall openings on both sides by 1" (25 mm) in all directions, permitting fasteners to be attached solidly to undamaged, structurally intact wall surfaces.

With Pathway   Without Pathway Retrofit/Repair Wall Plate Kit .Purchase kits with or without pathway. IMPORTANT NOTE: Suitable wall fasteners must be purchased separately. CATALOG NUMBER EZDP33WR   CATALOG NUMBER EZP133R